Bedside Table Lamp for Bedroom, Small Desk Lamp with USB Ports, 5.3"W x 5.3"D

very well made. fits in the corners for better light direction. highly recommend

LOVE it! The "velcro" strips are a GAME CHANGER! The one thing I will say, if you need to adjust the lights, the velcro will not let go! It will come off of the tape before it lets loose of the fabric on the inside of the safe! (GOOD THING)! AND they come with a 3 year warranty?

Installed these lights for my son's IKEA wardrobe after IKEA led lights failed. A bit of drilling to make holes in the back but final results is amazing. The package has everything you need to light up a large shelf + wardrobe. Motion sensor is a great plus, a bit of a delay at times to turn ON but not a big deal

Very fast install. Just plug them together, adhere them in place with pre-applied 3M continuous pads. You can add the provided screws if you wish

Looks good, quick and easy to install. My wife loves the fixture

Bought this light to go in my stairwell. It gives iff plenty of light, The black and brown gives it a farmhouse feel and goes with another light I have in the foyer

These work great. I have bought multiple for different areas

Beautiful and inexpensive. They look great over my kitchen island, providing the perfect amount of light. So pretty! Easy to install, too

We use these lights in our trailer and they work great. Nice also as a small light to take to bathroom in the dark

I’ve tried battery-operated under-cabinet lights in the past, and they were a huge disappointment—dim and unreliable. So, I was thrilled to find this wired LED lighting kit! I already had power available above the cabinet over my sink, and the included wire made installation a breeze. The setup was straightforward, and I had it up and running in no time. The brightness of these light bars is incredible! I purchased the 6-pack but only needed four, which is great because I now have spares in case one ever fails. The lights are so bright that I’m already using the included dimmer dial to tone them down a bit, which is a fantastic feature for customizing the ambiance. I’ve included before and after photos to show just how beautifully these transformed my kitchen. Highly recommend this product for anyone looking for reliable and bright under-cabinet lighting!

Very easy to install! Lots of options for number of lights on at a time and various brightness levels. Anxious to see how long they last since they are battery driven

VERY well made product. The kit was extremely comprehensive, anticipating every need an installer might have. I modified the items by getting rid of the interconnect cables and direct wiring them to each other in series so I could butt them up one against the next... The light is very a pleasant warm white. Overall, EXCELLENT product!

This kit is nice and easy for under cabinet installation. It has everything needed to cleanly install the lights and manage cord control. My hope is they have good longevity as we use these frequently in our laundry room when doing stain removal. They also provide a nice accent light

I have a small kitchen and this was just enough to light up the countertops while I’m preparing food

I replaced rope light strings for our over-cabinet kitchen lighting, and the Litever lights gave me both the control and the effect I wanted. The easy to install clips that hold each light bar in place are great, and the dimmers allowed us to set exactly the right effect

It's been installed in kitchen for about six months. It is exposed to both heat and steam with no problems

This is the 3rd set I have bought of this same brand all for display cabinet projects. They are easy to install, lightweight and the lights produce almost no heat and yes, the remote really works. I have had no issues and have ordered more due to low cost, has worked reliably for me and easy to install. I had halogen puck lights at one time and heat from those was terrible

I just finished installing this product so I cannot comment on the long term functionality. However, my initial feelings are all positive. These lights were easy to install and there were adequate accessories included to run and hide all the excess wires. With area prep, layout and installation this project with done in under 2 hours. The before and after makes me wonder why I waited so long to tackle this project. When installing I used a 1/2" spade bit and a 90° attachment for the drill to get the holes where I wanted them. I used a sacrificial board clamped to the exit side to keep from excessive tare out but if you own a forstner bit I would recommend using that instead. Overall I would say this is worth it to brighten up an kitchen

Was hoping for more Blue but they are hanging now so I will live with them

I really like the lights but the installation is another matter. There was a template, I taped it to the bottom of my upper kitchen cabinet, drilled a hole in the spot, put the two screws in those places. In 4 different attempts, I was not able to get the screws lined up to exactly have the heads go into the appropriate places. I even got a ruler and measured. Final solution! VELCRO!!! Worked great. I had to deal with whatever screws I had and maybe some with smaller heads would have worked better but mine did fit in the holes. Oh Well!! They are now installed. Remember VELCRO!!!

Bought two of these motion detected kits to do my liberty 50 gun and a small safe in my closet. After mocking up one kit in my large safe And not being able to see a difference with the light on I plugged in the other kit to see if there was something wrong with it, but they are identical. In the end I ended up using both kits in the small 13 gun safe which is a very bright grey color (almost white) so I was very disappointed when one kit left it very gloomy looking in there. I don’t know how some of these other pictures got that kind of output from these. I couldn’t imagine trying to use them as under cabinet lights. I have a small battery powered light from Hornady stuck to the top of my 50 gun that puts out a ton more light. Otherwise the motion detector works. Not as fast as that Hornady, it does take a couple seconds but that’s not a huge deal, atleast until every second counts, that’ll be your test. The inclusion of 3M adhesive on two sides of the corner mount panels is a nice touch and I really appreciate not cutting corners on adhesive. With the global shortages I’m not sure if they sourced inferior LED’s or if the photos on here give it to much credit. But I would say if your application has brightly colored surfaces so as not to soak up to much light I’d give these a shot. Worst case you buy another kit with a switch to add lights afterwords. I’m kind of bummed I had to use my other motion kit but I guess I have a spare one of those now