42" Brown Modern Low Profile Ceiling Fans with Lights and Remote, 42 Standard

I had two older fluorescents already recessed into the bottom of the cabinets so it did make it easier for me. I wasn’t positive how I was going to put a new set in but ordered this set and it arrived the next day. It had everything you need in the kit and more. You can hardwire it or use the plug. You can use a switch or a dimmer or both. It has three different methods of hanging the wires. It had extra plug and play wire sets if you need to run the lights further away opening your options. I used my recessed areas after removing the old ballast sets to tuck the pack and dimmer and wires into. I ran six lights and hung them with the plastic clips. Very easy and straightforward. I now have six lights which two around the corners and I can set the dimmer. I hard wired into one of the old sets. I’m happy

This product is high quality. Comes with more than what you need; different clips and cords. Can be hardwired or plug in. Does not feel cheaply made. Very organized packaging like they cared. I did purchase some DC extension cords to make runs from above to below the cabinets. Very pleased

These lights are beautiful when on and off. We placed ours on a dimmer switch and I couldn’t be happier with the purchase

We purchased a set of these to go over my favorite paintings and absolutely love them! The lights are easy to install and look beautiful! I love that the direction of the light could be adjusted. These daytime pictures aren't doing them justice, but trust me, they are perfect!

This was one of the easiest installs of undercabinet lighting that I have done. And I’m much happier with this product than I was with my puck lighting. Spending time familiarizing yourself with the product and the parts will speed up your installation

Great light puts off a pretty color when lit up. Didn't like the how the length was restricted to a particular length

It seems to work OK. Note: UL listing is not reflected in the manual and seems to be only a tiny inscription on the plug

I like how it lights up my safe and how the lights are strung together with two leads. Since the installation is in tight spaces so that the lights are facing inward instead of in my face, it would be easier if the lights were attached with velcro instead of screws. The inside of my safe is carpet that velcro my cling to. Also, securing the wires would have been easier if plastic wire clamps were included. I would like to have had 8 lights instead of the 6 included, but I cannot locate anywhere to purchase just the lights and connecting wires. Finally, (and nothing to do with this particular product) my safe sits on a hard (dense) rubber mat (like the ones used in horse stalls). The electrical feed is through the bottom of the safe. Since the safe sits flat on the mat, the mat needs to have a slot cut in it wide enough for the wire to rest in. This should be done before the safe is sat on the mat

They changed the wiring system!!! 😒 Now each light you have to run a cord to the main system. Soooooo annoying so no I have extra cords to deal with and you can cover a large area

Love the product! Really lights up my safe, motion detector just a little slow

I mounted the light perfectly level, but the hinge part does not seem to be level and adjusting it did not seem to help. Disappointing